Civil and Structural engineer for construction

Job Title

Civil Engineer – Construction (Civil & Structural, Green Building, Water Treatment)

Location

Project Site – Hyderabad – Ranga Reddy Dist.
Reports to: Construction Manager / Project Manager
Department: Engineering / Projects

Req ID: R-1174295

Role Purpose

Deliver end-to-end site execution for civil and structural works, ensure green building compliance, and support water/wastewater treatment infrastructure construction—meeting safety, quality, cost, and schedule targets.

Key Responsibilities

1) Civil & Structural (C&S) Execution

• Supervise execution of earthworks, foundations, PCC/RCC/structural steel, masonry, flooring, waterproofing, paving, and drains as per approved drawings and method statements.

• Review IFC drawings, manage RFIs, deviations, and redlines; coordinate with design/PMC for constructability and field changes.

• Ensure compliance with applicable codes (e.g., IS codes, NBC 2016, factory building standards) and client specifications.

• Conduct bar bending schedule (BBS) checks, rebar inspections, shuttering/formwork checks, concrete pour approvals, slump and cube tests.

• Complete Ground level planning in PEB errections schedules and Monitor the quality of executions .

• Monitor structural steel fabrication/erection (fit-up, welding, bolting, NDT, alignment).

• Interface planning with MEP/utilities to avoid clashes; coordinate underground services and civil inserts/sleeves.

• Lead daily toolbox meetings; plan manpower, machinery, and material requirements.

2) Green Building (Sustainability)

• Implement sustainability goals (IGBC/LEED/GRIHA targets): site waste management, material submittals (recycled content, low-VOC), erosion/sedimentation control, heat island mitigation, and water/energy efficiency measures.

• Maintain documentation for credits: delivery challans, product certificates, environmental declarations, and commissioning logs.

• Support envelope performance, daylighting, and indoor air quality compliance during construction.

• Coordinate third-party commissioning (Cx), blower door/airtightness tests (if applicable), and OPR/BOD alignment.

3) Water & Wastewater Treatment (WTP/WWTP/ETP/STP)

• Execute civil works for intake structures, equalization tanks, clarifiers, aeration basins, MBR/SBR/ASP units, filter houses, chemical rooms, sludge handling, and associated pipe galleries/channels.

• Coordinate with process/mechanical vendors on equipment foundation levels, anchor bolts, grout pockets, embed plates, and trench layouts.

• Ensure waterproofing, crack control, leak testing (hydrostatic), joint treatment, and chemical resistance specifications.

• Support process commissioning readiness: gravity flow levels, weirs, scum baffles, penstocks, and access/maintenance clearances.

• Integrate rainwater harvesting/zero liquid discharge (ZLD) or reuse systems where applicable.

4) HSE & Quality Assurance/Quality Control

• Enforce site HSE: PTW, WAH, LOTO, scaffolding, excavation shoring, confined space, lifting plans, and housekeeping.

• Prepare ITPs/QAPs; ensure inspection hold points and third-party/NABL testing.

• NCR/CAR management; root cause analysis and corrective/preventive actions.

• Maintain safety/quality KPIs and incident reporting.

5) Planning, Contracts & Commercial

• Provide inputs to project schedule (WBS), daily/weekly progress tracking, micro-planning, and look-aheads.

• Joint measurements, DPR/MPR, reconciliation (cement, steel, concrete), and productivity tracking.

• Support subcontractor management, rate analysis, RA bills, change orders/claims, and BOQ verifications.

6) Stakeholder & Statutory Coordination

• Coordinate with client/PMC, consultants, vendors, utility agencies, local authorities, and auditors.

• Assist in compliance with construction permits, environmental approvals, and factory/local body norms.

• Attend progress/coordination meetings; present site status and risk/mitigation plans.

7) Documentation & Billing schedule

• Maintain site logs, test records, pour cards, inspection reports, method statements, and as-built drawings.

• Use BIM/3D models (if available) for clash detection/quantities; leverage digital tools for snagging, RFIs, and progress tracking.

• Timely Verification of the site Billings to have right cash flow and maintaining all the data of the GRN and Billing Data .

Qualifications & Experience

• Education: B.E./B.Tech in Civil Engineering .

• Experience: 5–10 years (adjust range as needed) in industrial/commercial construction with at least one project involving water/wastewater treatment and one green building–certified or targeted project (IGBC/LEED/GRIHA).

• Codes/Standards: Working knowledge of IS codes, NBC 2016, IS 456, IS 800, IS 875, IS 3370 (liquid retaining), welding/NDT basics, relevant environmental and wastewater guidelines.

• Tools: AutoCAD, MS Project/Primavera, MS Excel, BIM (Navisworks/Revit preferred), QA/QC digital tools, surveying (Total Station) basics.

Skills & Competencies

• Strong site execution leadership and contractor management.

• Reading/interpreting drawings, BBS, and shop drawings.

• Concrete technology, waterproofing systems, and structural steel erection know-how.

• Understanding of wastewater process layouts, levels, watertight structures, and corrosion protection.

• Sustainability mindset; ability to maintain credit documentation and enforce low-VOC, waste segregation, and energy-water efficiency measures.

• HSE-first behavior; incident prevention and risk assessment.

• Commercial awareness: measurements, reconciliation, and change control.

• Clear communication, stakeholder handling, and problem-solving.

Certifications (Preferred)

• First Aid/Fire Safety; Scaffolding Inspector (desired).

• Concrete/steel QA certifications (e.g., NDT Level II for relevant personnel is a plus).

Key Performance Indicators (KPIs)

• Schedule: % activities completed on time; variance from baseline.

• Quality: First-pass yield; # of NCRs per month; closure lead time.

• Safety: TRIR/LTIFR; # of SHE observations and closeouts.

• Cost: Material reconciliation accuracy; change order control; productivity indices.

• Sustainability: Credits achieved vs. planned; waste diversion rate; water/energy efficiency milestones.

• Commissioning Readiness: Punch list closure; hydrotests/leak tests pass rate for tanks/channels.

Working Conditions

• Site-based role; extended hours/weekend work as per project needs.

• Physical requirements: frequent walking, climbing, and inspections in outdoor/industrial environments.

• PPE compliance at all times.